Kaiser Reprogeräte Accessoriesör
- 800 x 32 x 600 mm
- Holding device with glass pressure plate
- for the reproduction of books, magazines etc.
- also suitable for negatives in photo labs
- can be extended with camera holder
- Non-reflective, matt black base board
- 45x28x50 cm, with printed grid and spirit level
- Height adjustment with weight compensation
- Connection thread 1/4" and 3/8
- Large, non-reflective, matte gray coated base board
- imprinted fine grid as well as cm and inch scale
- height adjustable feet
- Spirit level in base
- Height of guide column: approx. 1 m
- Load capacity: max. 4 kg
Free live consultation
Your individual consultation - from the comfort of your sofa
Arrange appointment- Non-reflective, matt black base board with printed grid field
- Dimensions: base board: approx. 400x500x25 mm
- Height of guide column: 760 mm
- Height adjustment via friction drive
- Guide column made of special aluminum multi-chamber profile
- with manually height-adjustable camera support
- with printed cm and inch scales
- two locking screws for fixing
- Height adjustment with hand crank or motorized
- height-adjustable feet
- Spirit level on the base
- Repro plate
- Metal base plate with non-slip carpet pad
- Surface in matt gray lacquer with 18% reflection for exposure determination
- Printed line grid with cm scales and DlN format markings
- Wall mounting possible
- Size of imprinted grid field: 460 x 340 mm
- Dimensions (WxHxD): 500 x 10 x 380 mm
- Including four template holders made of permanent magnetic plastic profile
- LED lighting device RB 100D
- Daylight lighting device
- with two 100 watt area lights
- for uniform and soft illumination, dimmable
- LED arrays: 2 x 504 high-CRI LEDs
- Color temperature: 5600 Kelvin
- Color rendering index: CRI ≥ 95
- Beam angle: 85°
- Kaiser LED Illuminator RB 560 AL
- LED arrays: 2 x 272 SMD LEDs
- Color temperature: 5600 K
- Color rendering index: CRI = 95
- Illuminance* with soft lens: 6800 Lux, without soft lens: 8000 lux
- Power consumption: 2 x ≤ 40 W
- Operating voltage: 24 V
- Light emission area of one luminaire: 58 x 16.5 cm
- Vertical rods: Length 76 cm / cross section 20 x 20 mm
- Kaiser Copylizer lighting unit RB 521 AB
- with two area lights for even and soft illumination
- emitted light completely free of infrared and UV components
- LED arrays: 2 x 192 SMD LEDs
- Color temperature: 5600 K
- Color rendering index: CRI: 96
- Beam angle of the LEDs: 100°
- For mounting camera arms
- Guide column made of aluminum multi-chamber special profile
- motorized height-adjustable camera support
- imprinted cm and inch scales
- two locking screws for fixing
- Cable remote control
- Kaiser holding rod (20 mm)
- suitable for lights
- consisting of two vertical holding rods
- with sturdy cast aluminum clamping bases
- Crossbars can be adjusted in height
- Length of vertical holding rods: approx. 73.5 cm
- Length of crossbars (from vertical holding bar): approx. 65.5 cm
- Edge length of all bars: 20 mm
- Non-reflective, matte gray coated base board with imprinted fine grid as well as cm and inch scale
- Camera arm horizontally adjustable
- Load capacity: max. 1.5 kg
- Repro and title arm RT 1
- Camera mounting points for landscape and portrait format shots
- with exchangeable connection thread B 1/4 / B 3/8 and rubber pads
- Camera support can be moved horizontally via parallel guide and fixed in any position
- Entire repro and title arm swivels for reproducing vertical originals
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
Delivery time (from-to) working days after receipt of payment
The item is not in stock in our inhouse warehouse and will be ordered from the external warehouse/manufacturer or disributor after you have placed an order. The expected delivery time is listed with the item.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
We are happy to order for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Goods have been ordered. Long delivery time expected. Pre-order now and secure your place on the waiting list.
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.