
Rollei winter discount
Get 10% discount on all Rollei items with the code: ROLLEI2025.
The deal starts on December 30, 2025 and is valid until January 12, 2026.
- Camera cable
- for Rollei shutter release
- 10cm long with 2.5 mm stereo jack
- Rollei reflector set with grids
- large beam angle, long range
- evenly illuminated area
- high-contrast light with 3D effect
- Diameter: 24 cm (reflector), 22.5 cm (grids)
- Illumination angle: 70° (reflector), 10°, 30°, 60° (grids)
- Honeycomb size: 3 x 3 mm (30° grid), 7 x 8 mm (60° grid)
- Depth: 19.5 cm (reflector), 1.9 cm (grids)
- grids supplied are easy to attach
- Bowens S-type bayonet
- Rollei F:X Pro Reverse GND8 Gray Graduated Filter 100 mm Rectangular Filter
- reverse graduated filters are used for sunrises and sunsets
- ultra-fine coating ensures razor-sharp images - even with 150 MP high-end cameras
- exemplary color fidelity - capturing nature as the eye sees it
- impressively clear images thanks to approx. 99.5 percent absence of reflections
- diamond-like scratch resistance - extremely hard surface coating for optimum protection
- enormously temperature-resistant - tested in scorching heat and bone-chilling cold
- Gray gradient filter Reverse IR GND8
- Optical density 0.9
- F-stops reduction 3 stops
- Material Gorilla Glass
- Rollei F:X Pro Center GND8 gray graduated filter 100 mm rectangular filter
- centered graduated filters are used to darken the brightest area in the center of the image, e.g. for
- Sunrises and sunsets
- ultra-fine coating ensures razor-sharp images - even with 150 MP high-end cameras
- exemplary color fidelity - capturing nature as the eye sees it
- impressively clear images thanks to approx. 99.5% freedom from reflection
- diamond-like scratch resistance - extremely hard surface coating for optimum protection
- extremely temperature-resistant - tested in scorching heat and freezing cold
- Gray gradient filter Center IR GND8
- Optical density 0.9
- F-stop reduction 3 stops
- Material Gorilla Glass
Free live consultation
Your individual consultation - from the comfort of your sofa
Arrange appointment- Rollei mini screw clamp
- with six 1/4-inch and two 3/8-inch connections
- two adapter screws included
- firm hold, small and compact
- with a clamping width of 1.3 to 4.5 cm
- suitable carrying case for the Rollei C5i
- made of robust nylon
- small inner pocket for accessories
- Carrying strap for comfortable carrying over the shoulder
- soft padding to protect the tripod during transportation
- Lumen Flex Frame M
- Dimensions assembled: 68 x 34 cm
- Length of individual struts: 35.5 cm (long strut, 2x )
- 32.5 cm (short strut, 4x)
- Weight: 360g
- Material: Aluminum alloy
- Filter case for the Rollei 100 mm rectangular filter system
- with blank label for labeling
- Label window on the filter case
- Studio flash reflector
- For strong illumination of subjects with hard light and hard shadows
- Internal silver coating ensures good light reflection
- Easy to transport
- 55° beam angle
- Compatible with flash units that have a Bowens connection
- practical screw set for various applications
- suitable for tripods, lamp tripods, monopods, tripod heads, cameras and camera accessories
- made from high-quality metal for a long service life
- Replacement set for the Rolle C5i carbon tripod
- set of 3 rubber feet incl. spikes
- Spigot adapter
- 1/4-inch female thread to 1/4-inch male thread
- enables a secure hold of the photo accessories
- made from high-quality aluminum for a long service life
- quick and easy to attach
- Rollei Actioncam 4S Plus
- WiFi actioncam with 4K video resolution at 30 fps
- 140° wide-angle Lens
- 2.0 inch TFT display for easy operation
- integrated WiFi
- incl. rechargeable 750 mAh battery
- Battery life up to 70 minutes (1080P)
- incl. underwater protection housing for depths of up to 40 meters
- Memory can be expanded by 64 GB via microSD connection
- Rollei filter gasket 100 mm
- suitable for filters with the dimensions 100 x 100 mm
- simple gluing of the filter seal over the adhesive surface
- Material: sponge rubber
- Rollei F:X Pro Magnet MK II Soft GND8
- Diameter: 82 mm
- soft graduated filter to compensate for differences in brightness in the subject
- adjust the horizon along the filter's axis of rotation
- can be used as a single filter or combined
- magnetic mount: no screws or jammed round filter thread (a separately available magnetic base ring is required for use)
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
Delivery time (from-to) working days after receipt of payment
The item is not in stock in our inhouse warehouse and will be ordered from the external warehouse/manufacturer or disributor after you have placed an order. The expected delivery time is listed with the item.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
We are happy to order for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Goods have been ordered. Long delivery time expected. Pre-order now and secure your place on the waiting list.
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
