Microphones
The sound makes all the difference
Especially when recording video, it is important to ensure very good sound. While the cameras deliver outstanding images, the possibilities of the built-in microphones are very limited. To achieve impressive sound quality, you should use an external microphone. There are many options and an individual solution for every application! Shotgun microphones have a strong directional characteristic and are ideal if you can't get as close to the sound source as you would like. Shotgun microphones are a good and quick companion for recording atmospheric sound. Directional microphones on the other hand, are characterized by an even stronger directional characteristic and are particularly suitable when the sound arrives exclusively from the front. The simplest option for recording speech is offered by Clip-on microphones as they can be positioned close to the sound source and therefore keep out a lot of background noise. With Radio links for hand-held microphones or lavalier microphones, sound can be recorded without annoying cables. Our recommendation for all filmmakers: an external microphone is guaranteed to take your next video to the next level, whether it's a vacation video, a VLOG or an explanatory video.- Stereo shotgun microphone
- Supercardioid characteristic
- directional pickup possible over longer distances
- 5 volt preamplifier to minimize distortion
- fully integrated standalone device with intuitive operation
- 4 Neutrik combo inputs (XLR/6.35 mm) for microphones, guitars, bass and keyboards
- ultra low-noise Revolution(TM) high-gain preamps (+76 dB)
- Dual USB-C audio interface for simultaneous connection of 2 computers or mobile devices
- MFi-certified for digital connection of an iPhone
- Wideband Bluetooth for first-class voice quality and wireless monitoring
- 9 freely assignable channels for individual configuration of the mixer, 6 faders, 3 virtual faders
- assignable signal sources: 4x XLR/6.35 mm, Bluetooth, USB 1, USB 2, SMART Pad Audio
- 8 programmable SMART pads with 8 banks and 2 bank change buttons (for 64 actions)
- for triggering audio, effects, MIDI commands, mixer actions and vision switching
- 4 GB internal memory for SMART Pad audio
- Encoder with touch function for navigation and precise parameter settings
- professionally programmed channel presets and VOXLab(TM) Quick Editor
- APHEX signal processing: Aural Exciter, Big Bottom, Compellor
- High-pass filter, de-esser, noise gate, EQ, compressor
- Studio effects: Reverb, Delay, Pitch Shift, Robot Voice
- Mix-minus and ducking function
- Stereo and multitrack recording to microSD, USB storage device or computer
- Wi-Fi and Ethernet connection
- easy-to-use shotgun microphone
- for filming, vlogging, reporting or news coverage
- compact and lightweight design
- Supercardioid polar pattern ensures high sound quality for outdoor use
- works with phantom power (DC 48 V)
- can be attached to any camera with a standard hot shoe
- switchable low-cut filter to suppress unwanted low frequencies
- Windscreen to reduce wind noise
Free live consultation
Your individual consultation - from the comfort of your sofa
Arrange appointment- Esi NEVA DUO, 2/2 USB audio interface
- USB 2.0 audio interface with 2 inputs and 2 outputs
- USB 3.1, audio interface with USB-C, line, instrument and 2x microphone inputs with XLR / jack
- Power supply via USB
- The DeadCat VMP+
- luxurious fur windscreen
- suitable for the Rode VideoMic Pro+ for sound recording in windy environments
- Rode WS2 windscreen
- absorbs wind noise and explosive sounds
- suitable for Rode microphones NT1-A, NT2-A, NT1000, NT2000, NTK, K2 B
- Sennheiser XSW-D XLR MALE RX
- plug-in receiver
- with XLR plug
- Rode SC16 USB-C cable
- high quality protected patch cable
- Junction box for cable routing
- 300 mm (11.8 inch) long
- Output: USB-C
- Input: USB-C
- compatible with VideoMic NTG, NT-USB Mini, Wireless GO, RODECaster Pro, Al-1
- Sony ECM-B10
- wireless shotgun microphone
- Polar patterns
- high quality sound recording
- perfectly suited for the Alpha system
- ideal for vlogging or content creation
- Sennheiser MKH 418-S MS stereo directional microphone
- MS format
- All-metal housing
- Impedance: 1000 Ohm
- Frequency response: 40 - 20000 Hz
- Supercardioid / lobe
- Transducer principle: RF condenser microphone, connection: XLR-5M
- Dimensions: Ø 19 x 280 mm
- Weight: 220 g
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
Delivery time (from-to) working days after receipt of payment
The item is not in stock in our inhouse warehouse and will be ordered from the external warehouse/manufacturer or disributor after you have placed an order. The expected delivery time is listed with the item.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
We are happy to order for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Goods have been ordered. Long delivery time expected. Pre-order now and secure your place on the waiting list.
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
